Evs MulticamLSM Version 10.04 - January 2011 Configura Uživatelský manuál stáhnout pdf (Strana 14)

Issue

10.04.A

EVS Multicam – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

GENLOCK ERROR MSG

Possible values: Yes (default) / No

This function enables or disables the Genlock information on the output monitor. If

Genlock reference is not correct, the !GkV message appears on the output

monitor.

DISK ERROR MSG

Possible values: Yes (default) / No

This function displays an error message (!Raid) on the output monitor when a disk

is faulty.

Note

The server is equipped with a RAID disk array. This means that the

operation can continue seamlessly even with 1 faulty disk. If 1 disk is

disconnected during operation, the “!Raid

” message appears on all

output monitors, and another message appears when the operator shuts

down the application, to invite him to replace the disk and rebuild the

RAID array.

Refer to the XT Tech Ref Hardware

manual for details on the RAID

system and its maintenance.

NETWORK ERROR MSG

Possible values: Yes (default) / No

This function displays an error message (!Net) on the output monitor when the

network connection is faulty and another message ( Net) when the network

becomes available again and the system is trying to re-connect.

KEYWORD INFO

Possible values: No (default) / Yes

Up to 3 keywords and a ranking can be assigned to every clip. When the Keyword

Info parameter is set to “Yes”, these keywords and ranking appears on the OSD of

the output monitors when the clip is loaded on its Short IN point. As soon as the

operator starts jogging into the clip or initiates a playback, this information is

removed from the OSD so that the video content is clearly visible.

CLIP NAME

Possible values: [Name, VarId]

The Clip Name field specifies which information (clip name or VarId) should be

displayed as clip name on the OSD.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 97 98

Žádné komentáře

Evs MulticamLSM Version 10.04 - January 2011 Configura Uživatelský manuál Strana 14