Evs MulticamLSM Version 10.04 - January 2011 Operating Uživatelský manuál stáhnout pdf (Strana 194)

Issue

10.04.A

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

184

18.3.4 GENERAL PROCESS WITH MULTIPLE-BLOCK MEMORY

The general recording and playback process when controlling the camera using a

multiple-block memory is the following:

Press the softkey (A to D) corresponding to the memory block (1 to 4) on

which you want to record the material.

Start the recording on the camera by pressing RECORD on the Remote. The

material starts recording in loop mode on the given block.

If no block is selected, the recording starts on the first available block, or

on the block 1 for the first record.

3. When you want to start recording on another block, press TAKE.

4. Stop the recording in one of the following ways:

• Pressing Last cue will position the camera and cues to the first recorded

frame of the block.

• Jogging the dial will position the camera on the requested image.

• Selecting another block, which loads the first frame recorded on this

block in play mode.

5. Press PLAY to start the playback.

During the playback, the material played on the hypermotion camera is

recorded into the server via the SDI connection.

18.3.5 SPECIFIC PROCESS WITH MULTIPLE-MEMORY BLOCKS ON

VISION RESEARCH CAMERAS

INTRODUCTION

The Vision Research cameras follow a slightly different process to manage

multiple memory blocks. This process allows the following specific functions that

are not available on other hypermotion cameras:

• Playing automatically a block directly after it has been recorded (if no other

block is in play mode).

• Deleting a selected memory block that is not in play mode (CLEAR+CAM) or a

memory block that is being played (CLEAR).

• After a CLEAR action on a block in play mode, the camera automatically starts

recording on the cleared block (if nothing is being recorded on any other

block).

• Recording a memory block while playing or deleting another block.

• Pressing the CAM key corresponding to a block in record stops the record and

starts it on the next available block.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 200 201

Žádné komentáře

Evs MulticamLSM Version 10.04 - January 2011 Operating Uživatelský manuál Strana 194