Evs XT3 Version 11.02 - July 2013 Configuration Manual Uživatelský manuál stáhnout pdf (Strana 232)

• Cam C and Cam D can be mapped to network cameras using respectively the Cam C

and Cam D parameters.

Cam Mapping

Description Enables or disables the cam mapping feature.

Values Yes / No

Default Values No

Cam X

Availability This setting is displayed for each available camera line that can

be mapped to a network camera.

Description Specifies the network camera mapped to the corresponding

local camera.

Values The available network camera that can be mapped.

Default Values none

3.9.13. Hypermotion Management

Principles

The hypermotion cameras can be controlled by the LSM Remote Panel. The camera is

linked via a RS422 or LAN PC connector to the same XT3 server as the controlling

Remote Panel.

In setups including a hypermotion camera, the following principles apply:

• An XT3 server cannot control more than one hypermotion camera.

• The hypermotion camera is used with the classical channel configurations.

• Not all Multicam LSM configurations with several PGMs and several Remotes are

supported within the current RS422 and channel configuration constraints.

• If the Remote Mode setting in the Hypermotion Controller settings is set to

‘Hypermotion only’, an additional menu is made available in the main menu of the LSM

Remote Panel.

224 3. Multicam Configuration

EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 243 244

Žádné komentáře

Evs XT3 Version 11.02 - July 2013 Configuration Manual Uživatelský manuál Strana 232